Skip to main content

How to Replace the Motor

The Tools You Need​

tip

✔ A Phillips screwdriver

✔ A hex key

✔ Scissors

Step 1. How to remove all the panels​

What you need :

  • A Phillips screwdriver.

In this video, there are 3 things to do.

  1. Remove all the screws from the front and the back panel
  2. Unplug the wires
  3. Take off the side panel

Step 2. Take off the motor​

What you need :

  • A Phillips screwdriver
  • A hex key and Scissors

3 things to do:

  1. loosen small gear
  2. remove the motor
  3. unplug the wires

Step 3. Reinstall the motor​

What you need :

  • A Phillips screwdriver

3 steps to go:

  1. Install the motor
  2. Lock the screws
  3. Plug the wires

Step 4. Put the front board back​

Similar to step 1 reversed.