Skip to main content

How to Fix the Motor

The Tools You Need​

tip

✔ A Phillips screwdriver

✔ A hex key

✔ Scissors

Step 1. How to remove all the panels​

What you need :

  • A Phillips screwdriver.

In this video, there are 3 things to do.

  1. Remove all the screws from the front and the back panel
  2. Unplug the wires
  3. Take off the side panel

Step 2. Take off the motor​

What you need :

  • A Phillips screwdriver
  • A hex key and Scissors

3 things to do:

  1. loosen small gear
  2. remove the motor
  3. unplug the wires

Step 3. Fix the motor​

What you need :

  • Super glue

2 things to do:

  1. check if the ring is loose; a. If the ring is loose, it can be fixed by putting super glue easily b. If the ring is already tight enough, then the motor is broken, please contact us for a replacement.
  2. Use super glue to put them connected tightly together

Step 4. Reinstall the motor​

What you need :

  • A Phillips screwdriver

3 steps to go:

  1. Install the motor
  2. Lock the screws
  3. Plug the wires

Step 5. Put the front board back​

Similar to step 1 reversed.